In Cubase, monitoring means listening to the input signal while recording. Once you have selected the driver for your audio hardware and have set it up, you must specify which inputs and outputs to use.Ĭubase uses a system of input and output busses to transfer audio between the program and the audio hardware. Most audio cards provide one or more small applications that allow you to customize your hardware. Normally, when you start Cubase, a dialog opens that prompts you to select a driver, but you can also select your audio hardware driver as described below. For details, refer to the documentation that came with the audio hardware.īy selecting an audio driver, you allow Cubase to communicate with the audio hardware. If you are using a digital audio connection, you may also need a word clock connection between the audio hardware and external devices. For example, different inputs can be used, such as consumer line level (-10 dBV) or professional line level (+4 dBu). Using the correct type of input is important to avoid distortion or noisy recordings. When you connect your equipment, make sure that the impedance and levels of the audio sources and inputs are matched. Therefore, the following sections can only serve as examples. Your system setup depends on many different factors, for example, on the kind of project that you want to create, on the external equipment that you want to use, or on the computer hardware that is available to you. If you only use a stereo input and output from Cubase, you can connect your audio hardware, for example, the inputs of your audio card or your audio interface, directly to the input source and the outputs to a power amplifier and speaker. You must set up your audio equipment before you can use it in Cubase. The Studio Setup dialog allows you to set up your connected audio, MIDI, and remote control devices. To use Cubase, you must set up your audio, and if required, your MIDI system.

Here you will find detailed information about all the features and functions in the program.

This is the Operation Manual for Steinberg’s Cubase. The following list informs you about the most important improvements in Cubase and provides links to the corresponding descriptions.

Mulab 7 recording no inputs available